Compatible with Copper Spur UL2 tents featuring Tiplok™ Tent Buckles
Also compatible with Copper Spur UL2 Bikepack and Copper Spur UL2 mtnGLO® tents
Fast Fly setup available - stake out your footprint, insert your tent poles into corners, drape your fly over the top, and buckle it in for an even lighter, smaller packing setup
Fully compatible with Copper Spur UL2 models made after 2020 - may be compatible with older models, without Fast Fly capability
Proprietary HyperBead™ fabric technology; 30D nylon ripstop with 1500mm waterproof silicone and polyurethane treatment without intentionally added PFAS
All seams taped with waterproof, solvent-free polyurethane tape (No PVC or VOC's)
Tent and Footprint Cleaning and Care Instructions:
Storage:
Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.
Cleaning:
For light cleaning, sponge the product with warm water (not hot).
For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge
1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.
*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.
Seam Sealing:
Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.
Zippers:
Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.
Repairs and Warranty:
All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.
Questions? Call us or open a support case:
877.554.8975 | bigagnes.com/blogs/support
Tent and Footprint Cleaning and Care Instructions: Storage: Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty. Cleaning: For light cleaning, sponge the product with warm water (not hot). For more thorough cleaning you will need: -Wash basin (or bath tub)-Warm water (not hot) -Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash) -Sponge 1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear. 2. Apply waterproof gear specific wash and gently work into fabric with sponge. 3. Rinse gear thoroughly. 4. Hang it up to dry. 5. Triple check that your gear is completely dry before storage or use. *Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing. *Never use hot water, bleach, liquid detergents, or dishwashing liquids. *Allow to dry COMPLETELY before storage or use. *Avoid prolonged direct sunlight as UV exposure can compromise waterproofing. Seam Sealing: Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty. Zippers: Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant. Repairs and Warranty: All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris. Questions? Call us or open a support case: 877.554.8975 | bigagnes.com/blogs/support